Aluminum Channel

Aluminum Channel

Aluminum can be recycled an infinite number of times, meaning it is an environmentally friendly metal. Aloisdael Corp. produces high-quality aluminum in many shapes, sizes, and grades, so you're always guaranteed to find what you need from us.

Aluminum Channel products are made of high-quality and lightweight aluminum with high installability. This affordable and versatile metal is indispensable in manufacturing countless goods, such as cars, airplanes, and boats.

Mechanical Properties

  • Tensile Strength, Ultimate
  • 120 ~ 420 Mpa
  • Tensile Strength, Yield
  • 60 ~ 300 Mpa
  • Hardness, Brinell
  • 40 ~ 108

Product Specification and Size :

Standard Specification: GB/T 6892, ASTM B221, EN754, EN 755

Alloy and Temper
Alloy Temper
5xxx: 5083 O, H112
6xxx: 6005, 6060, 6061, 6063, 6082,6463 T5, T6, T66, T6511

Alloy Designation (For Reference)

Comparison of Alloy Designations for Aluminum Products

Alloy Series Chinese Standard American Standard European Standard
5xxx Series 5083 5083 EN AW-5083
6xxx Series 6005 6005 -
6060 6060 EN AW-6060
6061 6061 EN AW-6061
6063 6063 EN AW-6063
6082 6082 EN AW-6082
6463 6463 -

Temper Designation (For Reference)

Temper Definition
O Annealed
H112 Slightly strain harden from working at an elevated temperature or from limited amount of cold work
T5 Cooled from an elevated temperature shaping process and then artificially aged
T6 Solution heat-treated and then artificially aged
T66 Solution heat-treated and then artificially aged - mechanical property level higher than T6 achieved through special control of the process (6000 series alloys)
T6511 Solution heated-treaded, stress-relieved by stretching a controlled amount (permanent set 1% to 3% for extruded rod, bar, shapes and tube, 0.5% to 3% for drawn tube) and then artificially aged. Minor straightening is allowed after stretching to comply with standard tolerances

Available Size Range

Dimension Range
Width 10.0~200mm
10.0~300mm
Thickness 1.0~15.0mm
Length 1,000~6,000mm

- Production Process: Extruded
- Form & Image: Equal U Channel, Unequal U Channel
- Surface Finish: Mill Finish, unless otherwise specified
- Surface Protection: Paper interleaved

Application

Aluminum alloy channels can widely be applied in furniture, door, window, handrails and industry.

Type Application
Construction Curtain walls, cladding, ceiling, heat insulation and venetian blind block, etc.
Transportation Automobile parts, bus bodies, aviation, shipping and air-cargo containers, etc.
Electronic Appliance Electrical appliances, telecommunication equipment, PC board drilling guide sheets, lighting and heat radiating materials, etc.
Consumer Goods Parasols and umbrellas, cooking utensils, sports equipment, etc.
Other Military usage, color coated aluminum sheet

Chemical Composition (For Reference)

Chemical Composition conforms to Chinese, American and European standard specification

Alloy Si Fe Cu Mn Mg Cr Zn Ti Others:
Each
Others:
Total
Al: Min.
5083 0.40 0.40 0.10 0.40~1.0 4.00~4.90 0.05~0.25 0.25 0.15 0.05 0.15 remainder
6060 0.30~0.60 0.10~0.30 0.10 0.10 0.35~0.60 0.05 0.15 0.10 0.05 0.15 remainder
6061 0.40~0.80 0.70 0.15~0.40 0.15 0.80~1.20 0.04~0.35 0.25 0.15 0.05 0.15 remainder
6063 0.20~0.60 0.35 0.10 0.10 0.45~0.90 0.10 0.10 0.10 0.05 0.15 remainder
6082 0.70~1.30 0.50 0.10 0.40~1.0 0.60~1.20 0.25 0.20 0.10 0.05 0.15 remainder
6463 0.20~0.60 0.15 0.20 0.05 0.45~0.90 - 0.05 - 0.05 0.15 remainder